Spot the difference — The original Kanban, The Lean Kanban method, Professional Scrum with Kanban
Professional Scrum with Kanban came out in February 2018, and it can be found at https://www.scrum.org/resources/kanban-guide-scrum-teams. The Lean Kanban method is described in the Essential Kanban Condensed Guide, that’s at https://leankanban.com/. The original Toyota Kanban has been around for a little longer (see https://www.youtube.com/watch?v=zkQxvkXSiuA), not to be confused with Kaizen as per https://www.youtube.com/watch?v=wot9DFzFRLU or https://www.youtube.com/watch?v=E6rRHqb5MV0.
This video at https://www.youtube.com/watch?v=5izyN66PTxs in two minutes the original Kanban and Kanban for knowledge work.
I was first introduced to the original Toyota Kanban (see https://en.wikipedia.org/wiki/Kanban) at a factory in Ireland for a key partner for a global computer company. I remember people picking components from pairs of bins, focusing one bin of each pair at a time. Kanban aligns inventory levels with actual consumption. When a bin would empty a flag would raise signalling “please replenish me” to the chap from the warehouse watching for such signals from the end of the assembly line. After all, he could not put the entire warehouse on the line. This was just in time replenishment, as the other bin of the pair was not being consumed while the operator proceeded with her picking work. The size of the bin was important relative to the components in the bin, as the warehouse chap needs enough time from the signal to get parts from the warehouse to replenish the now empty bin of the pair before the other bin empties also. Allowances to be made for variation, how long the warehouse chap will take to see the signal, respond to the signal, complete replenishment, multi-tasking of the warehouse chap, production pace, and the supply chain for those components to even get them into the warehouse based on a supply-chain system. All sorts of charts were used to figure out the sweet spot, as there were many pairs of bins, one pair per component as I recall.
Indeed I also saw a CONWIP (see https://en.wikipedia.org/wiki/CONWIP constant amount of work in process) system, with constant replenishment of 1 large component per pull signal, this could help in the event of a fit of purpose replenishment time (to avoid unfit for purpose waiting — I mean this is the literal sense, I am not referring to David Anderson’s book on that topic — good book by the way).
Given that information on Toyota Kanban is in a number of places, I’ll try to pull it together here in summary….
I took some of this text straight (in italics) out of Wikipedia….
Toyota has formulated six rules for the application of kanban:
- Each process issues requests (kanban) to its suppliers as it consumes its supplies.
- Each process produces according to the quantity and sequence of incoming requests.
- No items are made or transported without a request.
- The request associated with an item is always attached to it.
- Processes must not send out defective items, to ensure that finished products will be defect-free.
- Limiting the number of pending requests makes the process more sensitive and reveals inefficiencies.
We also know from Theory of Constraints that excess inventory is typically a sign of a badly designed system. Throughput accounting rather than Cost accounting is recommended to avoid “silly games”. I saw a speech this year from a kind of famous guy who won a Finance Wizard of the year award and showed his prison card from the same year:). I think he took to to the extreme, I jest of course:). See https://www.youtube.com/watch?v=t_x3F3v6xBY&t=54s .
Kanban cards are a key component of kanban and they signal the need to move materials within a production facility or to move materials from an outside supplier into the production facility. The kanban card is, in effect, a message that signals depletion of product, parts, or inventory (this is key difference to the kanbans for knowledge work of knowledge workers , where each card represents an valuable knowledge work item). When received, the kanban triggers replenishment of that product, part, or inventory….
An example of a simple kanban system implementation is a “three-bin system” for the supplied parts, where there is no in-house manufacturing. One bin is on the factory floor (the initial demand point), one bin is in the factory store (the inventory control point), and one bin is at the supplier. The bins usually have a removable card containing the product details and other relevant information — the classic kanban card.
When the bin on the factory floor is empty (because the parts in it were used up in a manufacturing process), the empty bin and its kanban card are returned to the factory store (the inventory control point). The factory store replaces the empty bin on the factory floor with the full bin from the factory store, which also contains a kanban card. The factory store sends the empty bin with its kanban card to the supplier. The supplier’s full product bin, with its kanban card, is delivered to the factory store; the supplier keeps the empty bin. This is the final step in the process. Thus, the process never runs out of product — and could be described as a closed loop, in that it provides the exact amount required, with only one spare bin so there is never oversupply. This ‘spare’ bin allows for uncertainties in supply, use, and transport in the inventory system. A good kanban system calculates just enough kanban cards for each product. Most factories that use kanban use the coloured board system (heijunka box).
Courtesy of Wikipedia under a CC license
Here is a kind of funny video demonstrating the original kanban in action — https://www.youtube.com/watch?v=NmGdAbNB7TE. Or a more serious if dated example from Toyota at https://www.youtube.com/watch?v=P-bDlYWuptM.
For a two-bin scenario like the one described above, Kanban calculation variables for a signal kanban system include monthly demand (MD), changeovers per month(CO/M), average daily demand (AD), replenishment lead time (RT), safety factor (SF), and container quantity (CQ).
How many containers should we stack? Check out Gemba Academy
Under which container to put the signal kanban card? Check out Gemba Academy
Kanban calculation variables for a 2-bin system are as follows: average daily demand (AD), replenishment lead time (RT), safety factor (SF), and container quantity (CQ)
#kanban cards for production, same # of kanban cards for withdrawal — Check out gembaacademy.com
Toyota Kanban pre-requisites:
- smooth production, limited fluctuation in product mix, must know tomorrow’s daily schedule based on average monthly (to reduce inventory)
- small lot production, supported by quick change over (to be more responsive to customer pull)
- defect free delivery, by building quality in (to reduce inventory for “spares”)
- attach Kanban to containers (for visual control and to avoid mismatches)
- 5S discipline (keep the place tidy to avoid misplaced materials and shortages/excess materials)
- Use Kanban to expose and solve problems
Two bin kanban requires smoothing of production, whereas knowledge work Kanban does not require smoothing (although right-sizing is recommended). There is a difference in interpretation of terms like cycle time, lead time.
Ok, so roll on to roughly 2007 (I think), Kanban for knowledge work came about and as far as I know, its creators forgot to give it a name. The name came later. The Lean Kanban method is a start with what you do now method that gets signals from Kanban boards, but it’s much more than that. Thankfully, the Essential Condensed Kanban Guide was launched in early 2016. The Lean Kanban method is described in the Essential Kanban Condensed Guide, that’s at https://leankanban.com/. I won’t try to explain it here.
Professional Scrum with Kanban was launched in early 2018, ending the debate of either/or, and provides very useful support for Scrum teams who are already also using Kanban. See my blog post on how effective that is. Professional Scrum with Kanban came out in February 2018, and it can be found at https://www.scrum.org/resources/kanban-guide-scrum-teams. I won’t try to explain it here.
I was slow to pick up on Flow in late 2017, initially putting in down as another Kanban, but it’s a lot more with faster cycles & outside in experimentation, supported by DevOps. See https://www.flow-academy.org/.
Lean Kanban, Professional Scrum with Kanban, and Flow share the following:
- support for knowledge work
- acceptance of variation
- capability (if due care is taken) to deal with complex work where there are unknown unknowns
- creativity with visual signals
Lean Kanban and Professional Scrum with Kanban are strong with optimization of flow, metrics, workflow definition, design & management, and probabilistic forecasting. Flow is stronger with alignment, faster cycles, and outside in thinking, for now.
Here is my attempt at a comparison/contrast. Apologies in advance if I’m not doing them justice. I put this together in just a few hours, and I’m not saying it’s right (ok that’s my dampening strategy:)). I would appreciate input from experts on Lean Kanban (Lean Kanban University), Flow (Flow Academy), Professional Scrum with Kanban (Scrum.org) and Toyota Kanban from the traditional world of Lean.
Before your review the Venn diagram, it might be useful to refresh on Cynefin on YouTube. See:
- Cynefin sense-making framework — https://www.youtube.com/watch?v=N7oz366X0-8
- Children’s birthday party using Cynefin — https://www.youtube.com/watch?v=Miwb92eZaJg
For those most interested in the comparison/contrast between Toyota Kanban, Lean Kanban (from Lean Kanban University), and Professional Scrum with Kanban, here is a simplified version:
https://linktr.ee/johncolemanxagility - social and podcast links
https://linkpop.com/orderlydisruption - order training from right here